Check Valves
Hastelloy Lift Check Valves Supplier, Ductile and Alloy Iron Check Valve Stockist, Cast Iron Check Valves Exporter.
Duplex Steel Check Valves maintain pressure and prevent backflow. They are commonly used as a backup in case a pump fails to function. Check Valves are an essential product offered by Global Metals India that helps customers in ways more than one.
The pressure applied by the liquid that passes through the system opens up the valve. SS Check Valves are automatic valves that open with the forward flow of the fluid and close with the reverse flow. On the other hand, any reversal flow will close this valve. Stainless Steel Check Valves are of two types; Swing Check Valve and Lift Check Valve. Some other uncommon types of Check Valves are Ball Check Valve, Water Check Valve, Umbrella Check Valve, etc.
Stainless Steel Check Valves Dealer, Alloy Steel Check Valve, Carbon Steel Check Valves Wholesaler, Bronze Check Valves Stockist.
Check Valves - Super Duplex Steel Check Valves, Nickel Alloy Check Valve, Hastelloy Alloy Check Valve Distributor, Incoloy Alloy Check Valves, Inconel Check Valves, SS Swing Check Valves Stockist, Monel Diaphragm Check Valve, Hastelloy Lift Check Valves Distributor, Ductile and Alloy Iron Check Valve Suppliers, Cast Iron Check Valves Distributor of Committed Experience in Check Valves. Global Metals India Supplier & Exporter Valves In World Wide.
SS Check Valves
CS Swing Check Valve
AS Check Valves
Manufacturer of Global Metals India
MATERIAL : CS-105, AS-F11, F12, S.S.-304, 304 L, 316, 316 L
GLAND PACKING : Graphite Asbestos, Inconel, Teflon asbestos, PTFE STEM
SPINDLE : AISI 316 / AISI 410
TYPE : Screwed, S/W. and Flanged
END CONDITION : Screwed to ANSI B2.1 / IS 554 / Socket Weld Ends. ANSI B16. 11 / IS 4712 / Butt Weld to ANSI B 16.25 / Flanged according to ANSI-B 16.5 / BS 1560
DETAILS OF TESTS : BODY (HYD) / SEAT (HYD) / SEAT ( AIR )
TEST PRESSURE : 211kg / Cm2 i.e 3000 psi / 141kg / Cm2 i.e 2000 psi / 5.6 kg / Cm2 i.e 80 psi
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports